|
| | |
|
NEWS | |
PPCBoot 2.0.0
The Halloween Release
|
Fri Nov 1 00:01:24 MET 2002
|
This release is special:
It is the last, ultimate, final release of PPCBoot!
The PPCBoot project will not be continued any more. But: Don't Panic!
Le Roi Est Mort, Vive Le Roi!
Over time, the name PPCBoot has become inappropriate: we
don't exclusively support PowerPC CPUs. There is also support
for a couple of ARM7, ARM9, StrongARM and XScale based board.
Ports for ColdFire and even x86 are in the planning or
already under way. Thus it's time to acknowledge that this
project has become a universal bootloader - we will continue
development under the new flag
"Das U-Boot" - the Universal Boot Loader
The new project is again hosted at SourceForge, you can find it at
http://sourceforge.net/projects/u-boot/
Now for the details of this release:
It's mostly a bug-fix release, containing mostly optimizations
and fixes for smaller problems.
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.2.1
|
Mon Oct 25 14:51:00 MEST 2002
|
Mostly a bug fix release
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.2.0
|
Sun Sep 29 17:50:51 MEST 2002
|
Major changes:
ARMBoot source tree merged back into common tree.
PPCBoot now includes support for ARM7, ARM9 and StrongARM processors.
Support for XScale, ColdFire, ... to be added
New boards: 440GP Ebony, BAB7xx, BCM56xx, CPCI-440, ELPPC,
EVB-64260-750CX, GEN860T, PN62, R360MPI, UTX8245, dnp1110,
ep7312, impa7, lart, shannon, smdk2400, smdk2410, trab ...
Simultaneous support for several ethernet interfaces
(like SCC and FEC on MPC860T, or redundand network cards
on other systems)
Enhanced PCI support
Extensive Power On Self Test capabilities (for MPC8xx)
Support for modem dial-in with password authorization
Support to store environment variables in redundand flash sectors
(improved reliability)
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.1.6
|
Fri Jun 21 23:35:07 MEST 2002
|
LOTS of new things:
New boards: SCM, PCI405, OXC, CPU86, TTTech, ...
Grand Unifying I2C Interface Patch
Major driver cleanup (especially PCI); remove redundand code
MANY fixes / extensions
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.1.5
|
Fri Mar 8 01:32:59 MET 2002
|
LOTS of new things:
New boards: ORSG, ppmc8260, PCIPPC6, IAD210, EP8260, Sandpoint_8245, RPXClassic
Support for multiple ethernet interfaces (with automatic selection)
JFFS2 filesystem support (read only)
Improved Disk On Chip support
MANY fixes / extensions
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.1.4
|
Sat Jan 19 12:31:43 MET 2002
|
Support for M-Systems Disk-On-Chip
Support for QNX images
HUSH shell fixed (variable handling)
Some new boards supported
Sandpoint8240 now really working
many fixes / extensions
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.1.3
|
Fri Dec 28 18:27:08 MET 2001
|
Unified support for 7xx and 74xx CPUs
many new boards supported
many fixes / extensions
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.1.2
|
Fri Dec 7 02:33:51 MET 2001
|
Support for 7xx CPUs
Improved Support for 824x CPUs
HUSH Shell available as command line interpreter, including
for / while / until loops, if / then / fi, etc.
many fixes / extensions
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.1.1
|
Mon Nov 19 17:32:19 MET 2001
|
Boot Support for VxWorks images
misc fixes / extensions
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.1.0
|
Mon Nov 5 19:16:14 MET 2001
|
LCD driver for MPC823 CPUs
Real Shell available as command interpreter ("hush" from BusyBox)
many fixes / extensions
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.0.6
|
Wed Oct 17 22:16:13 MEST 2001
|
Cleanup for MPC8240 and IBM40x CPUs, which now use the data
cache to allocate memory for initial data and stack.
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.0.5
|
Tue Sep 11 22:49:39 MEST 2001
|
Support for some new boards (Mousse, AMX860, PM826, TQM8260)
All clocks in Hz now!!! See announcement!!!
many fixes / extensions
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.0.4
|
Sun Aug 5 17:43:18 CEST 2001
|
Support for some new boards (NX823, DASA_SIM, CCM)
new vendor directories used for Siemens boards
misc. fixes / extensions
added board database tools
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.0.3
|
Thu Jul 19 18:35:47 MEST 2001
|
Support for some new features, for instance:
configurable "preboot" command;
new directory layout for better support of vendors
with several boards, etc.
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.0.2
|
Thu Jul 5 23:05:58 MEST 2001
|
Support for lots of new features:
SCSI, Floppy Disk, CD-ROM, ISO Partition, MC146818 RTC,
Chips & Technologies 69000 Video Chip,
Standard (PC-Style) Keyboard,
protected RAM area, ...
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.0.1
|
Sun Jun 24 21:50:37 MEST 2001
|
SPI driver, support for SPI EEPROM and extended BedBug support
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 1.0.0
|
Fri Jun 15 02:00:54 MEST 2001
|
PPCBoot now supports 74xx CPUs and a couple of new boards.
Also, the BedBug debugger has been integrated into PPCBoot.
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 0.9.3
|
Wed May 30 17:47:30 MEST 2001
|
PPCBoot now supports DHCP and a couple of new boards.
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
PPCBoot 0.9.2
|
Tue May 1 18:22:29 MEST 2001
|
PPCBoot now supports NetBSD both as host (build PPCBoot) and target
system (boots NetBSD/mpc8xx).
Please see the announcement on the
mailing-list ppcboot-users. Check the download for the
latest tarball.
-- Wolfgang Denk |
Mailing List update
|
Mon, 12 Mar 2001 21:05:44 +0100
|
The whole mailling list archive moved to www.geocrawler.com
so a update of the mailing list links was required. Sorry for all the people tried
to access the archive and could not find any e-mails!
-- Raphael Bossek |
PPCBoot on Brave-GNU-World | Sat, 2 Dec 2000 16:14:01 +0100 |
Georg C. F. Greve wrote in the Issue #21 of Brave-GNU-World a short article about the Embedded PowerPC Linux Boot Project. -- Raphael Bossek |
PPCBoot on SiliconPenguin.com | Sat, 2 Dec 2000 16:14:01 +0100 |
Searching in the category Software/BIOS_and_Boot_Code on http://siliconpenguin.com/ you will get today also a link to http://ppcboot.sourceforge.net/ as result too. -- Raphael Bossek |
PPCBoot 0.6.4 released | Fri, 1 Dec 2000 00:20:54 +0100 |
Wolfgang announce the avaibility of version 0.6.4 today. Read this e-mail for a changelog. To get the sources use the CVS tag PPCBOOT_0_6_4 or use the tarball from the download section. -- Raphael Bossek |
PPCBoot 0.5.3 released | Sun, 15 Oct 2000 11:00:11 +0200 |
To get the latest sources use the CVS tag PPCBOOT_0_5_3 or use the tarball from the download section. The announcement with a ChangeLog can be found here. -- Raphael Bossek |
PPCBoot 0.5.2 released | Thu, 12 Oct 2000 20:35:23 +0200 |
One day later after the release of 0.5.1 where a new tag set, PPCBOOT_0_5_2. Feel free and check out the latest sources or download the tarball. Do not forget to report bugs or patches! The announcement from Wolfgang Denk can be found here. -- Raphael Bossek |
PPCBoot 0.5.1 released | Tue, 10 Oct 2000 22:46:48 +0200 |
Check the latest sources from our download section and read the announcement for a short overview over the latest changes. You can also stay tuned using CVS :) Use PPCBOOT_0_5_1 as tag while update or check-out. -- Raphael Bossek |
PPCBoot 0.5.0 available for download | Tue, 3 Oct 2000 06:11:04 +0200 |
Wolfgang Denk announced a new tarball of PPCBOOT at version 0.5.0 which can be downloaded via FTP or CVS. A list of all changes can be found in the CVS repository. -- Raphael Bossek |
PPCBoot at Linux-Directory.com | Tue, 3 Oct 2000 06:11:04 +0200 |
Today PPCBOOT where added into the Hardware:Embedded section at Linux-Directory.com is a link collection for Linux related topics. -- Raphael Bossek |
New release 0.4.4-pre1 available | Tue, 22 Aug 2000 01:16:31 +0200 |
New tarball version 0.4.4-pre1 from Wolfgang Denk available for FTP and CVS download. The announcement can be found here. -- Raphael Bossek |
New release 0.4.2 available for download | Fri, 4 Aug 2000 18:23:02 +0200 |
Wolfgang Denk announce today a new release of ppcboot 0.4.2 availiable as tarball and from CVS. Read Wolfgang's announcement here. -- Raphael Bossek |
First public anouncement | Thu, 27 Jul 2000 17:03:02 +0200 |
At www.linuxdevices.com you can read the official announcement of the Embedded PowerPC Linux Boot Project. -- Raphael Bossek |
Linux 2.4.0-test5 for Embedded PowerPC is working! | Thu, 27 Jul 2000 17:03:02 +0200 |
Yes it's true, Wolfgang Denk get it working. For more than two days his TQM8xxL boards are compiling non-stop the Linux kernel sources via NFS without any crashes! It takes 03:30 hours before a Linux kernel is compiled using this configuration. I can imagine that the speed improves using local IDE harddrives but it is a nice test for the TCP/IP stability :) If you are interested in hardware Wolfgang is using, take a look here. A another overview about Embedded PowerPC hardware can be found here. -- Raphael Bossek |
Sponsors added! | Wed, 26 Jul 2000 22:40:31 +0200 |
New SPONSORS sections opened and some website updates done based on the PPCBOOT documentation written by Wolfang Denk. -- Raphael Bossek |
Wolfgang Denk released PPCBoot 0.4.1 | Fri, 21 Jul 2000 02:02:00 +0200 |
Wolfgang Denk done great work on the old 8xxROM sources and released the first PPCBoot sources. Many things changed since the release of 8xxROM 0.3.0. Take a look in the download section. -- Raphael Bossek |
Big homepage update | Sat, 10 Jun 2000 01:10:03 +0200 |
After a long absence this site where updated including CVS, MAILING-LIST working. -- Raphael Bossek |
Project start | Mon, 24 Apr 2000 14:30:11 +0200 |
Project start at SourceForge. Moved the project maintains from http://www.s4l.de/ to SourceForge for a faster open source development. -- Raphael Bossek |
| |
| | |
| | |
|
SUPPORT | Wed, 26 Jul 2000 22:40:31 +0200 |
- A running PPCBOOT with command overview
ppcboot 0.9.0 (Apr 15 2001 - 20:28:15)
Initializing...
CPU: PPC823EZTnnB2 at 50 MHz: 16 kB I-Cache 8 kB D-Cache
Board: TQM823LDBBA3.200
DRAM: 16 MB
FLASH: 8 MB
PCMCIA: 5.0V card found: ARGOSY PnPIDE D5
Bus 0: OK
Device 0: Model: IBM-DSOA-20810 Serial #: 1R08RLJ463 Capacity: 775.2 MB = 0.8 GB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=> help
go - start application at address 'addr'
run - run commands in an environment variable
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
tftpboot- boot image via network using TFTP protocol
and env variables ipaddr and serverip
rarpboot- boot image via network using RARP/TFTP protocol
diskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd'
loads - load S-Record file over serial line
loadb - load binary file over serial line (kermit mode)
md - memory display
mm - memory modify (auto-incrementing)
nm - memory modify (constant address)
mw - memory write (fill)
cp - memory copy
cmp - memory compare
crc32 - checksum calculation
base - print or set address offset
printenv- print environment variables
setenv - set environment variables
saveenv - save environment variables to persistent storage
protect - enable or disable FLASH write protection
erase - erase FLASH memory
flinfo - print FLASH memory information
bdinfo - print Board Info structure
iminfo - print header information for application image
coninfo - print console devices and informations
ide - IDE sub-system
date - get/set date & time
loop - infinite loop on address range
mtest - simple RAM test
icache - enable or disable instruction cache
dcache - enable or disable data cache
reset - Perform RESET of the CPU
echo - echo args to console
version - print monitor version
help - print online help
? - alias for 'help'
=> loads
## Ready for S-Record download ...
~>hello_world.srec
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
29
[file transfer complete]
[connected]
## Start Addr = 0x00040004
=> go 40004 This is just a test.
## Starting application at 0x00040004 ...
Hello World
argc = 6
argv[0] = "40004"
argv[1] = "This"
argv[2] = "is"
argv[3] = "just"
argv[4] = "a"
argv[5] = "test."
argv[6] = "<NULL>"
Hit any key to exit ...
## Application terminated, rc = 0x0
=> flinfo
Bank # 1: AMD AM29LV160B (16 Mbit, bottom boot sect)
Size: 4 MB in 35 Sectors
Sector Start Addresses:
40000000 (RO) 40008000 (RO) 4000C000 (RO) 40010000 (RO) 40020000
40040000 40060000 40080000 400A0000 400C0000
400E0000 40100000 40120000 40140000 40160000
40180000 401A0000 401C0000 401E0000 40200000
40220000 40240000 40260000 40280000 402A0000
402C0000 402E0000 40300000 40320000 40340000
40360000 40380000 403A0000 403C0000 403E0000
Bank # 2: AMD AM29LV160B (16 Mbit, bottom boot sect)
Size: 4 MB in 35 Sectors
Sector Start Addresses:
40400000 40408000 4040C000 40410000 40420000
40440000 40460000 40480000 404A0000 404C0000
404E0000 40500000 40520000 40540000 40560000
40580000 405A0000 405C0000 405E0000 40600000
40620000 40640000 40660000 40680000 406A0000
406C0000 406E0000 40700000 40720000 40740000
40760000 40780000 407A0000 407C0000 407E0000
=> iminfo 40020000 40500000
## Checking Image at 40020000 ...
Image Name: 2.2.13 for NFS on TQM850L
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 381681 Bytes = 372 kB = 0 MB
Load Address: 00000000
Entry Point: 0000000c
Verifying Checksum ... OK
## Checking Image at 40500000 ...
Image Name: 2.4.0-test5 850 NFS test-wd
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 428089 Bytes = 418 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
=> bootm 40500000
## Booting Linux kernel at 40500000 ...
Image Name: 2.4.0-test5 850 NFS test-wd
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 428089 Bytes = 418 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.0-test5 (wd@denx.local.net) (gcc version 2.95.2 19991024
(release)) #2 Wed Jul 26 21:19:54 MEST 2000
Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.
0.98:10.0.0.2
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=
10.0.0.98:10.0.0.2
time_init: decrementer frequency = 187500000/60
Calibrating delay loop... 49.77 BogoMIPS
Memory: 14904k available (808k kernel code, 340k data, 40k init) [c0000000
,c1000000]
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
Starting kswapd v1.7
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2, 00:d0:93:00:02:6c
IP-Config: Guessing netmask 255.0.0.0
kmem_create: Forcing size word alignment - nfs_fh
Looking up port of RPC 100003/2 on 10.0.0.2
Looking up port of RPC 100005/2 on 10.0.0.2
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 40k init
Stand-alone shell (version 2.1)
> uname -a
Linux 10.0.0.98 2.4.0-test5 #2 Wed Jul 26 21:19:54 MEST 2000 ppc unknown
|
- Image formats
The "boot" commands of this monitor operate on "image" files which
can be basicly anything, preceeded by a special header; see the
definitions in include/image.h for details; basicly, the header
defines the following image properties:
- Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, LynxOS, pSOS, QNX; Currently supported: Linux)
- Target CPU Architecture (Provisions for Alpha, ARM, Intel x86, IA64, MIPS, MIPS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; Currently supported: PowerPC)
- Compression Type (Provisions for uncompressed, gzip, bzip2; Currently supported: uncompressed, gzip)
- Load Address
- Entry Point
- Image Name
- Image Timestamp
The header is marked by a special Magic Number, and both the header
and the data portions of the image are secured against corruption by
CRC32 checksums.
- Linux Support
Although PPCBOOT should support any OS or standalone application
easily, Linux has always been in the focus during the design of
PPCBOOT.
PPCBOOT includes many features that so far have been part of some
special "boot loader" code within the Linux kernel. Also, any
"initrd" images to be used are no longer part of one big Linux image;
instead, kernel and "initrd" are separate images. This implementation
serves serveral purposes:
- the same features can be used for other OS or standalone applications (for instance: using compressed images to reduce the Flash memory footprint)
- it becomes much easier to port new Linux kernel versions because lots of low-level, hardware dependend stuff are done by PPCBOOT
- the same Linux kernel image can now be used with different "initrd" images; of course this also means that different kernel images can be run with the same "initrd". This makes testing easier (you don't have to build a new "zImage.initrd" Linux image when you just change a file in your "initrd"). Also, a field-upgrade of the software is easier now.
| |
| | |
| | |
|
PLAN | Wed, 26 Jul 2000 22:40:31 +0200 |
The Embedded PowerPC Linux Boot Project (PPCBOOT) has
implemented a common and easily extensible boot program for embedded
devices. The entire project source code is released under the GNU
General Public License (GPL), and takes advantage of an open
development process at SourceForge.net, the highly popular portal of
open source software development.
In the embedded world it is very important to provide a flexible way
of configuring the system environment. Accordingly one of the
project's primary goals is to achieve a very flexible way of
configuring PPCBOOT. Developers must be able to decide which
components are really needed within the actual target system.
It is also important to auto-detect hardware components at runtime,
for example RAM or flash memory size or CPU type, in order to allow
flexible extension of PowerPC hardware to be possible without need
to change the code.
Another project goal is to support many standard off-the-shelf
boards, in order to help speed up the development process at the
beginning of new projects.
Future plans
Support for other devices such as USB or FireWire will also be
implemented in the future, given sufficient interest.
It is expected that the PowerPC Linux community will contribute code
to PPCBOOT, to extend its functionality with many new useful
features.
The "mini application" feature
An interesting feature of PPCBOOT is the "standalone application"
capability, which allows the inclusion of standalone application
programs that are launched by PPCBOOT. For example, special
diagnostic tools might be used to verify that system hardware is
functioning as expected prior to booting Linux. In this manner, the
standalone application feature of PPCBOOT could be used to replace
"good old boot monitors".
Another interesting use of the standalone application capability
could be to simplify the process of porting to new hardware --
because PPCBOOT does NOT need Linux. Consequently, it is possible to
develop a driver for PPCBOOT first, and then use it with minor
modification under Linux. In this process, the default Linux
development tools (e.g. gcc and binutils) are used, so there is no
need to learn special tools or techniques.
One reason the standalone appication feature is expected to be
popular is that it is easy to implement. It is not necessary to worry
about the environment; simply write the code, flash it together with
PPCBOOT, and test it.
| |
| | |
| | |
|
CVS | Sat, 10 Jun 2000 01:10:03 +0200 |
This project's SourceForge CVS repository can be checked out through anonymous (pserver) CVS
with the following instruction set. The module you wish to check out must be specified as the
modulename. When prompted for a password for anonymous, simply press the Enter key.
cvs -d:pserver:anonymous@cvs.ppcboot.sourceforge.net:/cvsroot/ppcboot login
cvs -z6 -d:pserver:anonymous@cvs.ppcboot.sourceforge.net:/cvsroot/ppcboot co -P ppcboot
Updates from within the module's directory do not need the -d parameter.
Browse the CVS repository
| |
| | |
| | |
|
AUTHORS | Wed, 26 Jul 2000 22:40:31 +0200 |
This project base on the initial work from Magnus Damm called 8xxROM. I have had to rename it to PPCBOOT because SourceForge does not allow any names that start with a digit. Thanks goes to all the people in the linuxppc-embedded mailing-list, especially to Dan Malek and his creat work on the Embedded PowerPC support in the Linux kernel.
People contribute to the PPCBOOT project :
- Andre Beaudin
- PCMCIA, Ethernet, TFTP
- Raphael Bossek
- 8xxROM 0.3.0
- David Brown
- Extension to 8xxROM 0.3.0
- Conn Clark
- ESTEEM192E support
- Magnus Damm
- 8xxrom
- Wolfgang Denk
- PPCBOOT initial version, continuing maintenance
- Dan A. Dickey
- FADS Support
- Dave Ellis
- EEPROM Speedup, SXNI855T port
- Marius Groeger
- MBX Support,
board specific function interface,
EST SBC8260 support
- Yoo. Jonghoon
- RPXlite Support
- Anne-Sophie Harnois
- Walnut405 Support
- Dan Malek
- FADSROM, the grandfather of all of this
- Jay Monkman
- EST SBC8260 support
- Stefan Roese
- IBM PPC401/403/405GP Support; Windows environment support
- Neil Russell
- Author of LiMon-1.4.2, which contributed some ideas
- Paolo Scaffardi
- FADS823 configuration,
MPC823 video support, I2C,
wireless keyboard, lots more
- Rob Taylor
- MBX860T and Sandpoint8240 Support
- Christian Vejlbo
- FADS860T ethernet support
| |
| | |
|